The ANVL Beretta 20X/30X Optic Plate is a rear dovetail style optic plate mounting system with a singular centered set screw for added mounting. This optic plate was designed for the Beretta Tomcat 30X and the Beretta Bobcat 20X. Please apply a dot of blue Loctite to the set screw upon installation. This set screw location does not specifically dictate the actual center relationship between optic plate and slide. You should still measure your left and right side distances making sure that they are equidistant to the right and left of the slide.
This optic was designed for the RMSC style optic patterned Optics. We do not have a rear set of recoil lugs so it fits a greater number of optics in the RMSC family.
We are unsure of a quality fit in older Legacy models of the Tomcat and Bobcat.
These plates were designed directly from factory Beretta tolerance spec of the dovetail. Depending on fit between tolerances from the factory slide and the dovetail, some may have a tighter or looser feel.
All ANVL products should be installed by a professional gunsmith. ANR DESIGN is NOT responsible for poor Gunsmithing installation techniques and damage to personal property.
Reviews
There are no reviews yet.