Solid design. Fits pistol with mounted light extremely well.
Would recommend their product if you are considering it.
Cbdb (verified owner)–
Slim, well made, great fit, love the fast clips.
SR (verified owner)–
I was really looking forward to a thoughtfully designed plastic holster. After a long delay, the holster for my light-bearing HK P2000 arrived. It was molded to fit the pistol and light perfectly. Although it was annoying that the holster required the light to be in a specific position, not adjusted to my preference. The design relies on the light for retention, which creates stress on a part that is not permanently attached to the frame. There is no consistent groove through the holster to allow the light to slide out smoothly. The retention method is merely a super tight fit, making the draw crunchy and inconsistent. Yes, crunchy. The internal sides of the kydex are not smooth. The interior of the holster is course and scraped the finish off the slide in several areas after only a few test draws. It was so sad. THE HOLSTER RUINED THE FINISH OF A PERFECT CONDITION HK PISTOL.
Alex Costa (verified owner)–
We are sorry you are unhappy with your holster. You can contact CS for help. Olight Mini lights are stupid because we cannot guess what position you like to have yours in, they are very unique and they have a very large lever to QD the light down, a HK pistol deserves a much better light like a Surefire or Streamlight. The gun finish is probably not “ruined” Lubricate the holster in the hot spots with gun lube. A tooth brush and some gun solvent should get the plastic residue off the gun. If kydex PLASTIC removed HK Nitride or Coating off the gun, then the coating from HK is trash then.
Joe Honious (verified owner)–
Bought for my CZ P01 to replace the Vedder Holster I carried for 4 years. That holster never really fit correctly, tolerances were too loose and the gun rocked back and forth as I walked. This AnR holster fits correctly and hugs tighter to my body. Highly customizable when ordering, not a “close enough” product like some competitors. I have used Raven Concealment, Bravo Concealment, and Vedder- I would purchase AnR over those brands.
Alex Costa (verified owner)–
Thank you Joe!
lostwithjohn (verified owner)–
Another awesome holster from ANR. This time it’s a OWB HK P30 w/Surefire X300U. They confirmed the holster would accommodate my HK P30L with a slight bit of muzzle passing through the open bottom. I ran the holster today at the range for a few hundred rounds, and it’s perfect. Good stuff, highly recommended!
Joe (verified owner) –
Solid design. Fits pistol with mounted light extremely well.
Would recommend their product if you are considering it.
Cbdb (verified owner) –
Slim, well made, great fit, love the fast clips.
SR (verified owner) –
I was really looking forward to a thoughtfully designed plastic holster. After a long delay, the holster for my light-bearing HK P2000 arrived. It was molded to fit the pistol and light perfectly. Although it was annoying that the holster required the light to be in a specific position, not adjusted to my preference. The design relies on the light for retention, which creates stress on a part that is not permanently attached to the frame. There is no consistent groove through the holster to allow the light to slide out smoothly. The retention method is merely a super tight fit, making the draw crunchy and inconsistent. Yes, crunchy. The internal sides of the kydex are not smooth. The interior of the holster is course and scraped the finish off the slide in several areas after only a few test draws. It was so sad. THE HOLSTER RUINED THE FINISH OF A PERFECT CONDITION HK PISTOL.
Alex Costa (verified owner) –
We are sorry you are unhappy with your holster. You can contact CS for help. Olight Mini lights are stupid because we cannot guess what position you like to have yours in, they are very unique and they have a very large lever to QD the light down, a HK pistol deserves a much better light like a Surefire or Streamlight. The gun finish is probably not “ruined” Lubricate the holster in the hot spots with gun lube. A tooth brush and some gun solvent should get the plastic residue off the gun. If kydex PLASTIC removed HK Nitride or Coating off the gun, then the coating from HK is trash then.
Joe Honious (verified owner) –
Bought for my CZ P01 to replace the Vedder Holster I carried for 4 years. That holster never really fit correctly, tolerances were too loose and the gun rocked back and forth as I walked. This AnR holster fits correctly and hugs tighter to my body. Highly customizable when ordering, not a “close enough” product like some competitors. I have used Raven Concealment, Bravo Concealment, and Vedder- I would purchase AnR over those brands.
Alex Costa (verified owner) –
Thank you Joe!
lostwithjohn (verified owner) –
Another awesome holster from ANR. This time it’s a OWB HK P30 w/Surefire X300U. They confirmed the holster would accommodate my HK P30L with a slight bit of muzzle passing through the open bottom. I ran the holster today at the range for a few hundred rounds, and it’s perfect. Good stuff, highly recommended!
Alex Costa (verified owner) –
Thanks John!!!!